Bed in Box

Bed in Box

This Box-bed was created and designed by Robert MacPherson to fit a rather strange niche.

Medieval re-enactor MacPherson designed this knockdown bed to be used during his extended trips to Pennsic, an annual event that gathers more than 10,000 re-enactors and medieval enthusiasts for two weeks of life in the Middle Ages. It is typical for campers at the event to construct elaborate campsites, knockdown beds and furniture that are easy transport.

The majority of the project is made of select pine; the panels are birch plywood. The finish is semi-gloss polyurethane.



Step 1: Design and Materials

Bed in Box Bed in Box

I should preface any description of the design by mentioning that a picture really is worth a thousand words, especially in this case. If any of these explanations don’t make sense, be sure to check out the photos to clarify (more so during the other steps than this one; these pictures are just a compilation of my poorly organized design sketches).

The design is simple enough; it consists of two main parts/systems: the “box” and the slat/rail system. The “box” is a simple box, cut in half, which contains the extending sides. In order for the box to be able to close completely, the sides (and hinges) have to be offset by several inches. This will be covered in greater detail in the next step.

The slat/rail system consists of a 1″x2″ pine board running along both sides of the extended “box”. This rail is lined with small, trapezoidal 3/4″x3/4″ pieces that engage with the dovetail joints in each slat. This ensures that the sides cannot extend once the slats are in place.

I’ll cover the assembly in greater detail in the following steps, but for now I’ll wrap up this step with the list of materials needed:

Hardware:

6″ Fence Gate Hinges (12)

3/4″ Wood Screws

2″ Wood Screws

Lumber:

1″x2″ Pine Board: (3) 8′ Lengths

TBD (I made these cuts after assembly; they get a little complicated with the hinges in the way)

1″x3″ Pine Board: (10) 8′ Lengths

(20) 39″ Lengths

1″x8″ Pine Board: (2) 8′ Lengths

(2) 26.75″ Lengths

(2) 28.25″ Lentghs

1″x10″ Pine Board: (3) 8′ Lengths

(2) 40.5″ Lengths

(2) 39″ Lengths

(2) 10″ Lengths

Wood Stain, brushes and/or rags for applying



Step 2: “The Box”

Bed in Box Bed in Box Bed in Box Bed in Box Bed in Box Bed in Box

First, construct the two halves of the box by screwing together one of the 40.5″ pieces with the 39″ piece and the two 10″ sides. See the first picture for clarification. Yes, I know this will leave a gap along the bottom, and I do mostly regret it….but in the long run you’ll almost never see it because it will almost always be covered when in the “closed” position. The first of many potential improvements, but as I was on a deadline I let it slide.

Next, the complicated part. In order for the sides to be able to close without interfering with each other, they must be offset by a couple of inches. I calculated a 2″ offset and that seemed to work alright.

In order for the design to function correctly, the shorter end (the 26.75″ one) must be the “offset” side. That means that when you attach the 26.75″ side to one of the halves of the box, the hinges must be set 2″ into the box. The hinges for the 28.25″ side are then attached flush to the other half of the box. Once again, see the pictures for clarity. I tried to take some good closeups so that you can get the idea.

For the other side, flip the 26.75″ and 28.25″ lengths. I mention this because I accidentally forgot and had to take everything off and re-do it.

I placed the hinges almost flush with the top and bottom of the 1″x8″ pieces, but I offset the 1″x8″ from the 10″ sides of the box by about 3/4″. Initially, I designed this offset to allow for a lid to be placed on top of the box, but I ended up nixing that idea so you could easily set these flush with one another.

Some reminders/tips for the hinges: Make sure that attach the hinges in the right orientation. These hinges will normally bind in one direction and then fold completely in the other direction. Depending on where they are being placed, the hinges will need to be attached accordingly. Also, I used a router to knock of an 1/8″ of wood behind the hinges in order to buy myself a little more space when in the “closed” position. Once again, see the pictures for clarification.



Step 3: The Slats

Bed in Box Bed in Box Bed in Box Bed in Box

This is where it gets complicated. First, the 1″x2″ lengths must be cut into corresponding lengths to run along the 10″, 26.75″, and 28.25″ lengths. It wouldn’t hurt to miter every one of these before screwing them to the sides of the bed. This will allow the sides to open and close without bumping into each other. I attached these “rails” 3/4″ under the top set of hinges. Try your best to keep these level relative to each other (and especially from one side to the next , so that there’s no incline when you put the mattress down).

Once these are in place, cut your remaining 1″x2″ into 3/4″x3/4″x1.5″ pieces, with a slight miter on both sides. This miter can be anywhere from 20-30 degrees, and must correspond directly with the dovetail that will be cut into each of the slats.

Now the slats. Cut your 1″x3″ lumber into as many 39″ lengths as possible (I ended up using 21, but in hindsight I would have preferred a round 20). Trace and cut a 3/4″ deep dovetail into both sides of each slat, once again corresponding to the depth and angle of the trapezoidal pieces that were just cut.

Now ensues the tedious process that I will summarize in the following 4 steps:

1. Set slat on rail.

2. Place one trapezoidal piece on both ends, engaging the dovetails in the slat.

3. Drill a pilot hole and screw the trapezoidal piece into the rail.

4. Rinse, repeat

**Tip: number your slats 1-20 and mark one side of the bed as the starting point. This will help you avoid some complications in the future.

It sounds simple, but you’ll also have to check often to ensure that the pieces you’re screwing in aren’t interfering with the box’s ability to close and open. This will require some adjusting of the pieces around the hinges (you can probably see a couple of adjustments in the closeups)

Step 4: Finishing Touches

Bed in Box Bed in Box Bed in Box Bed in Box Bed in Box Bed in Box

Now that you’ve got everything assembled, there’s just a few more finishing touches before it’s ready for a mattress! First of all, you’ll need something to support the sides of the bed, near the hinges. My simple, practical solution was to attach a small bracket to a 2″x4″, which -conveniently- fit perfectly under the sides of the bed. These, as well as the slats, fit conveniently into the box when collapsed into the “closed” position.

Also applied a dark stain to the outside of the box, which gives it a much better look overall, both in the open and closed positions. Let it dry and it’s ready for a mattress! The twin-sized mattress fits perfectly inside the frame, and if I do say so myself it looks great. Simple. Practical. Beautiful. Oh yeah, and less than $150.

Zinus Traveler Elite Folding Guest Bed Frame with ...

Zinus Traveler Elite Folding Guest Bed Frame with Comfort Foam Mattress

View

  1. Mattress layers include: 0.5 inch fiber padding, 2.5 inches Pressure Relieving Comfort Foam
  2. 14 inch high steel folding bed frame
  3. Only the Highest Quality Foam – Foam is CertiPUR-US Certified for durability, performance, and content
  4. Open dimensions are 31 inches x 75 inches x 17 inches. Weight limit- 250 pounds
  5. Folds in half for ease of movement and storage. Its 4-inch foam mattress will give your guests an unexpectedly comfortable nights sleep away from home

Coleman ComfortSmart Camping Cot...

Coleman ComfortSmart Camping Cot

View

  1. Folding camping cot offers bed-like comfort for a restful night's sleep
  2. Provides superior support with coil suspension system and thick foam mattress
  3. Durable steel frame can support up to 275 pounds and accommodate most people up to 5 feet 7 inches tall
  4. Portable design fits into most car trunks when folded. Strong folding steel frame
  5. Measures 69 x 25 x 15 inches when unfolded

Zinus Memory Foam Resort Folding Guest Bed with Wh...

Zinus Memory Foam Resort Folding Guest Bed with Wheels, Standard Twin

View

  1. Features a 5 inch mattress with 1 inch of memory foam and 4 inches of High-density Base Support Foam
  2. Strong solid steel foldable frame
  3. Matching fabric on mattress and frame designed to look like a box spring and mattress set
  4. The dimensions of the item folded is 38.6" x 15.4" x 48.6". Opens to a twin-size 38 inches x 75 inches x 19 inches (mattress + frame)
  5. Only the Highest Quality Foam – Foam is CertiPUR-US Certified for durability, performance, and content

Regalo My Cot Portable Toddler Bed, Includes Fitte...

Regalo My Cot Portable Toddler Bed, Includes Fitted Sheet, Royal Blue , 48x24x9 Inch (Pack of 1)

View

  1. CONVENIENT: No set up required. This cot’s simple fold and go system is quick and easy to use.
  2. DURABLE: Made with an all steel frame that is light-weight and will hold up to 75 pounds.Cleans up quickly with a damp cloth and soap
  3. COMFORT: This cot has a large 48”L x 24”W x 9”H sleep surface with full canvas sleeping area and includes a fitted sheet for added comfort.
  4. TRAVEL: Light weight for travel. This cot folds down to 9”L x 8”W x 24”H.
  5. FOR USE: Great for naptime, sleep-overs, vacations, pre-school, playtime etc.

Olee Sleep Tri-Folding Memory Foam Topper, 4 inch,...

Olee Sleep Tri-Folding Memory Foam Topper, 4 inch, Blue

View

  1. Thickness: 4 inches (1 inch dura i-gel foam + 3 dura had support foam).Product Note: Please allow 24 - 72 hours for your Mattress to regain its full shape. Any memory foam will expand faster in a warmer room. In cold temperature, at delivery, your mattress may take a bit longer to return to full sized from its compressed state.The expansion time of the mattress will vary as per the surrounding
  2. Complete with supportive memory foam topper providing soothing sleeping.
  3. The ideal solution to temporary sleeping accommodations. Perfect portable topper for unexpected sleepover guests, dorm rooms, camping, and traveling.
  4. Comfortable sense: no pain in the Back or neck when people sleep on it.
  5. Smart package: our advanced compressed package technology delivers the topper in a box directly to your front door.
  6. Please allow 24 - 72 + hours for your Mattress to regain its full shape.

American Furniture Alliance Hide A' Mat 3.5 x...

American Furniture Alliance Hide A' Mat 3.5 x 30 x 75 inch Jr Twin TriFold Mattress, Navy

View

  1. COMFORT - Ultra Soft poly sleep surface & Pro Fiber, soft, breathable, comfortable filling.
  2. MULTI USE - Great for Sporting Activities, Reading, Sleep Overs, Dorm Rooms, TV/Video Games, Yoga, Tent Camping and more.
  3. PORTABLE - Mattress folds easily for travel or storage. Ideal for Dorms, Apartments, Tight Quarters. Comes with convinient carry strap.
  4. DURABLE - Made of durable non slip mesh sides and bottom with soft top.
  5. SAFETY - Our Pro Fiber Filling meets all National Flammability Standards. Sleep with peace of mind, knowing you are safe!!

Zinus Weekender Elite Folding Guest Bed with Bonus...

Zinus Weekender Elite Folding Guest Bed with Bonus Storage Bag

View

  1. 4 Inch mattress features premium cover
  2. 1 inch top layer of fiber padding plus 3 inches of Pressure Relieving Comfort Foam for support
  3. Deluxe steel frame with casters for easy transport
  4. Casters are uniquely positioned on the frame, so when it is open the legs do not move around on the floor
  5. Worry Free 1 year limited warranty

Milliard Deluxe Diplomat Folding Bed – Twin Size...

Milliard Deluxe Diplomat Folding Bed – Twin Size - with Luxurious Memory Foam Mattress and a Super Strong Sturdy Frame – 75” x 38

View

  1. EXCEPTIONAL SUPPORT – The Diplomat distinguishes itself with a full-steel wire lattice frame that’s reinforced and overbuilt to ensure maximum sturdiness for 300lbs! Fold out dimensions – 75” long x 38” wide. Mattress is 73" long for proper fold up.
  2. LUXURIOUS COMFORT –the Diplomat features our proprietary and unique Milliard Dual-Sided Folding Bed Mattress, for your choice of comfort. The supportive foam base and the memory foam layer come together to provide you the luxurious comfort your body craves. It also comes with a super soft mattress cover that’s easy to toss into the wash for a quick clean.
  3. PRACTICAL & PORTABLE – Fold up your Diplomat to a slim 14” thick profile and enjoy the smooth-rolling wheels that allow you to easily transport and store your bed anywhere.
  4. QUICK & EASY ASSEMBLY – Assembly has never been easier for a folding bed! With the clear, illustrated manual, and all tools provided, the Diplomat’s one-time estimated assembly time is just 5-15 minutes.
  5. REAL SERVICE - When you purchase Milliard, you can relax knowing you have a dedicated team of real people ready to help you with any questions or concerns you may have.

Milliard Premium Folding Bed with Luxurious Memory...

Milliard Premium Folding Bed with Luxurious Memory Foam Mattress – Perfect Guest Bed Featuring a Super Strong Sturdy Frame - Cot Size

View

  1. Features exceptional fit-and-finish. Full-metal bed frame features assisted-folding, double-reinforced stabilizer bars
  2. Includes a memory foam mattress with an extra-soft removable cover. Trampoline bed base is supple, yet supportive.
  3. Clamshell folding pattern secures shut with an adjustable trident buckle for easy opening and closing and for use with other mattresses
  4. Easy assembly – assembly is quick and simple and includes a detailed instruction manual with pictures.
  5. Super strong for adults. Dimensions: L 75 x W 30.5 x H 16 inches. Compact: Folded its just 12 inches thick

Intex Comfort Plush Elevated Dura-Beam Airbed with...

Intex Comfort Plush Elevated Dura-Beam Airbed with Built-In Electric Pump, Bed Height 22", Queen

View

  1. Inflatable Queen airbed for home use engineered with Fiber-Tech Construction
  2. Built-in, high-powered electric pump for hassle-free inflation and deflation, inflates mattress in approximately 4 and 1/2 minutes to the desired firmness
  3. Waterproof flocked top raised 22 inches from floor with indented sides to keep your fitted sheets from slipping
  4. Duffel bag included for easy storage and transport. Dimensions: 60 x 22 x 80 inches (W x H x L), 600-Pound capacity , Package dimensions - 18.00 inches x 60.00 inches x 80.00 inches
  5. Please ensure the inflation dial is turned fully to the inflate or deflate position for optimal performance; Airbed Pump: Built-in

Lucid Rollaway Folding Guest Bed with 4 Inch Memor...

Lucid Rollaway Folding Guest Bed with 4 Inch Memory Foam Mattress- Rolling Cot- Easy Storage-Cot Size Bed

View

  1. SUPPORTIVE FOAM - Rollaway guest cot size mattress is soft and ultra-supportive, with a medium feel mattress featuring one inch of memory foam and three inches of support foam
  2. EASY SETUP - Quickly pull out the bed for guests or children, then fold and roll away for super easy storage. Caster wheels allow for quick and easy transport and set up
  3. PERFECT FOR GUESTS – The rollaway bed is the perfect solution for surprise overnight guests who need a place to sleep. Then fold the bed frame and put it away in storage when not in use.
  4. STURDY SUPPORT: The frame consists of locking wheels for safety and a spring supported deck which supports more comfortably than wood slat and wire mesh support alternatives, total weight capacity 350 pounds
  5. Heavy-duty bed frame comes with an impressive 10-year warranty - Available sizes: Cot, Twin and Twin XL; Cot measures 31 x 73 inches

ECR4Kids Lock and Roll Personal Safe, Travel Lockb...

ECR4Kids Lock and Roll Personal Safe, Travel Lockbox, Grey

View

  1. Slim-Fit Personal Safe: Keep diverse personal articles, laptops, tablets, and important documents securely out of sight with this lock box; ideal for dorm rooms, RV's, vacation rentals and homes
  2. Under-Bed Storage Box: This sturdy low-profile personal storage case features four wheels and a key-locking lid; conveniently store under a bed or couch
  3. Locking Container: A 70” long steel cable wraps around a permanent fixture, feeds through two holes in the base of the container and secures using the included carabiner with screw lock
  4. Durable Materials: Lightweight and durable plastic case features metal locking hardware; simple assembly required to affix the four wheels; all hardware, tools and instructions included
  5. Product Dimensions: 26" L x 16.25" W x 5.8" H; weight capacity is 50lbs; two security keys included